| |
RN2962
- Les principales caractéristique des transistors bipolaires. Caractéristiques techniques. Répertoire mondial des transistors. Marquage composant: RN2962
Matériau utilisé: Si
Polarité du transistor: PNP*PNP
Puissance dissipable maximale pour une température du boitier de 25°C (Pc): 0
Tension collecteur–base (maximale) Ucb: 0
Tension maximale de VCE au delà de laquelle le transistor risque d'être détruit (Uce): 50
Tension émetteur–base (maximale) Ueb: 0
Courant collecteur maximal (Ic): 0.1
Température maximale de jonction (Tj), °C:
Fréquence maximale de fonctionnement fT:
Capacite collecteur (Cc), pF:
Gain en courant DC hFE (hfe): 0
Boitier: SOT-363_SC-88_US6
Recherche équivalences (un remplaçant pour le transistor RN2962
) RN2962
- Fiche technique PDF, Datasheet
1.1. rn2961fs_rn2962fs_rn2963fs_rn2964fs_rn2964fs_rn2966fs.pdf  Size:171K _toshiba  |
 | RN2963FS -1.1 ? -2.7
VCE = -0.2 V,
Input voltage (ON) VI (ON) V
IC = -5 mA
RN2964FS -1.2 ? -3.6
RN2965FS -0.6 ? -1.1
RN2966FS -0.6 ? -1.2
RN2961FS~2964FS -0.8 ? -1.5
VCE = -5 V,
Input voltage (OFF) VI (OFF) V
IC = -0.1 mA
RN2965FS, 2966FS -0.4 ? -0.8
Collector output VCB = -10 V, IE = 0,
RN2961FS~2966FS Cob ? 1.2 ? pF
capacitance f = 1 MHz
RN2961FS 3.76 4.7 5.64
RN2962FS 8 10 12
RN2963FS 17.6 22 26.4
Input resistor R1 ? k?
RN2964FS 37.6 47 56.4
RN2965FS 1.76 2.2 2 |
5.1. rn2967fs_rn2968fs_rn2969fs.pdf Size:127K _toshiba  |
 | FS
-1.3 ? -2.6
Collector output VCB = -10 V, IE = 0,
RN2967FS~2969FS Cob pF
? 1.2 ?
capacitance f = 1 MHz
RN2967FS
8 10 12
Input resistor RN2968FS R1 ? k?
17.6 22 26.4
RN2969FS
37.6 47 56.4
RN2967FS
0.17 0.213 0.255
Resistor ratio RN2968FS R1/R2 ?
0.374 0.468 0.562
RN2969FS
1.71 2.14 2.56
2 2007-11-01
RN2967FS~RN2969FS
(Q1,Q2 common)
RN2967FS RN2967FS
IC - VI(ON) IC - VI(OFF)
-100 -10000
Ta=100°C
-10 -1000
Ta=100°C
25 -25
25
-1 -100
-25
EMITTER COMMON |
5.2. rn2967ct_rn2969ct_100527.pdf Size:184K _toshiba  |
 | 68CT VI (OFF) V
-0.6 ? -1.1
IC = -0.1mA,
RN2969CT
-1.3 ? -2.6
Collector output VCB = -10 V, IE = 0,
RN2967CT to 2969CT Cob pF
? 1.2 ?
capacitance f = 1 MHz
RN2967CT
8 10 12
Input resistor RN2968CT R1 ? k?
17.6 22 26.4
RN2969CT
37.6 47 56.4
RN2967CT
0.17 0.213 0.255
Resistor ratio RN2968CT R1/R2 ? ?
0.374 0.468 0.562
RN2969CT
1.71 2.14 2.56
2 2010-05-27
RN2967CT~RN2969CT
(Q1,Q2 common)
RN2967CT RN2967CT
IC - VI(ON) IC - VI(OFF)
-100 -10000
Ta=100°C
-10 |
5.3. rn2967fe-rn2969fe.pdf Size:219K _toshiba 5.4. rn296pfs_090420.pdf Size:100K _toshiba  |
 | roduct”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for thei |
5.5. rn2967-rn2969.pdf Size:133K _toshiba 5.6. rn2961-rn2966.pdf Size:142K _toshiba 5.7. rn2961ct_rn2966ct_090417.pdf Size:212K _toshiba  |
 | E (sat) ? ? -0.15 V
saturation voltage IB = -0.25 mA
RN2961CT -1.0 ? -2.0
RN2962CT -1.0 ? -2.2
RN2963CT -1.1 ? -2.7
VCE = -0.2 V,
Input voltage (ON) VI (ON) V
IC = -5 mA
RN2964CT -1.2 ? -3.6
RN2965CT -0.6 ? -1.1
RN2966CT -0.6 ? -1.2
RN2961CT to 2964CT -0.8 ? -1.5
VCE = -5 V,
Input voltage (OFF) VI (OFF) V
IC = -0.1 mA
RN2965CT, 2966CT -0.4 ? -0.8
Collector output VCB = -10 V, IE = 0,
RN2961CT to 2966CT Cob ? 1.2 ? pF
capacitance f = 1 MHz
RN2961CT 3.76 4.7 5.64
|
D'autres types de transistors... RN2913FS
, RN2961CT
, RN2961FE
, RN2961FS
, RN2961
, RN2962CT
, RN2962FE
, RN2962FS
, TIP31C
, RN2963CT
, RN2963FE
, RN2963FS
, RN2963
, RN2964CT
, RN2964FE
, RN2964FS
, RN2964
.
|
