NUD3160LT MOSFET. Datasheet. Equivalente. Reemplazo. Hoja de especificaciones. Principales características

   Número de Parte: NUD3160LT
   Tipo de FET: MOSFET
   Polaridad de transistor: N

ESPECIFICACIONES MÁXIMAS

   Pdⓘ - Máxima disipación de potencia: 0.3 W
   |Vds|ⓘ - Voltaje máximo drenador - fuente: 60 V
   |Vgs|ⓘ - Voltaje máximo fuente - puerta: 20 V
   |Id|ⓘ - Corriente continua de drenaje: 0.25 A
   Tjⓘ - Temperatura máxima de unión: 150 °C

CARACTERÍSTICAS ELÉCTRICAS

   |Vgs(th)|ⓘ - Tensión umbral entre puerta y fuente: 2.5 V
   Qgⓘ - Carga de la puerta: 0.4 nC
   Cossⓘ - Capacitancia de salida: 5 pF
   Rds(on)ⓘ - Resistencia estado encendido drenaje a fuente: 3.3 Ohm
   Paquete / Cubierta: SOT23

Búsqueda de reemplazo de MOSFET NUD3160LT

NUD3160LT Datasheet (PDF)

..1. Size:1440K cn vbsemi
nud3160lt.pdf

NUD3160LTwww.VBsemi.twN-Channel 60-V (D-S) MOSFETFEATURESPRODUCT SUMMARY Halogen-free According to IEC 61249-2-21 VDS (V) RDS(on) ()ID (mA)Definition2.8 at VGS = 10 V60 250 Low Threshold: 2 V (typ.) Low Input Capacitance: 25 pF Fast Switching Speed: 25 ns Low Input and Output LeakageSOT-23 TrenchFET Power MOSFET 1200V ESD ProtectionG 1

7.1. Size:142K onsemi
nud3160.pdf

NUD3160Industrial InductiveLoad DriverThis MicroIntegrationt part provides a single component solutionto switch inductive loads such as relays, solenoids, and small DCmotors without the need of a free-wheeling diode. It accepts logichttp://onsemi.comlevel inputs, thus allowing it to be driven by a large variety of devicesincluding logic gates, inverters, and microcontrollers.M

9.1. Size:146K onsemi
nud3105d.pdf

NUD3105DIntegrated Relay,Inductive Load DriverThis device is used to switch inductive loads such as relays,solenoids incandescent lamps, and small DC motors without the needof a free-wheeling diode. The device integrates all necessary itemshttp://onsemi.comsuch as the MOSFET switch, ESD protection, and Zener clamps. Itaccepts logic level inputs thus allowing it to be driven by a

9.2. Size:89K onsemi
nud3124.pdf

NUD3124Automotive Inductive LoadDriverThis MicroIntegrationt part provides a single component solutionto switch inductive loads such as relays, solenoids, and small DCmotors without the need of a free-wheeling diode. It accepts logichttp://onsemi.comlevel inputs, thus allowing it to be driven by a large variety of devicesincluding logic gates, inverters, and microcontrollers.M

9.3. Size:147K onsemi
nud3105.pdf

NUD3105Integrated Relay,Inductive Load DriverThis device is used to switch inductive loads such as relays,solenoids incandescent lamps , and small DC motors without the needof a free-wheeling diode. The device integrates all necessary itemshttp://onsemi.comsuch as the MOSFET switch, ESD protection, and Zener clamps. Itaccepts logic level inputs thus allowing it to be driven by a

9.4. Size:135K onsemi
nud3112.pdf

NUD3112Integrated Relay,Inductive Load DriverThis device is used to switch inductive loads such as relays,solenoids incandescent lamps, and small DC motors without the needof a free-wheeling diode. The device integrates all necessary itemshttp://onsemi.comsuch as the MOSFET switch, ESD protection, and Zener clamps. Itaccepts logic level inputs thus allowing it to be driven by a

Otros transistores... WPB4002 , FDM15-06KC5 , FQD2N60CTM , FDM47-06KC5 , FDPF045N10A , FMD15-06KC5 , FDMS8672S , FMD21-05QC , IRLB4132 , FDMS86368F085 , FMD47-06KC5 , FDBL86361F085 , FMK75-01F , FMM110-015X2F , FMM150-0075X2F , FMM22-05PF , FMM22-06PF .

Liste

Recientemente añadidas las descripciónes de los transistores: