DTA216 . Datasheet. Equivalente. Reemplazo. Hoja de especificaciones. Principales características
Número de Parte: DTA216
Código: BA
Material: Si
Polaridad de transistor: Pre-Biased-PNP
Resistencia de Entrada Base R1 = 1 kOhm
Resistencia Base-Emisor R2 = 10 kOhm
Ratio típica de resistencia R1/R2 = 0.1
ESPECIFICACIONES MÁXIMAS
Disipación total del dispositivo (Pc): 0.225 W
Tensión colector-base (Vcb): 50 V
Tensión colector-emisor (Vce): 50 V
Corriente del colector DC máxima (Ic): 0.1 A
Temperatura operativa máxima (Tj): 150 °C
CARACTERÍSTICAS ELÉCTRICAS
Transición de frecuencia (ft): 250 MHz
Ganancia de corriente contínua (hfe): 33
Paquete / Cubierta: SOT23
Búsqueda de reemplazo de transistor bipolar DTA216
DTA216 Datasheet (PDF)
dta216.pdf
SEMICONDUCTORDTA216TECHNICAL DATADigital transistors (built-in resistors) Features1) The built-in bias resistor allows the configuration OUTof an inverter circuit without connecting any external in-put resistors (see Equivalent cir-cuit).GND2) Each bias resistor is a thin-film re-sistor. INSince they are completely in-sulated, the input can be SOT-23positively biase
dta201 dta214 dta217 dta223.pdf
SEMICONDUCTOR DTA201 ~ DTA214 /TECHNICAL DATADTA217 / DTA223Bias Resistor TransistorsPNP Silicon Surface Mount Transistorswith Monolithic Bias Resistor NetworkThis new series of digital transistors is designed to replace a single3device and its external resistor bias network. The BRT (Bias ResistorTransistor) contains a single transistor with a monolithic bias network2cons
dta218.pdf
SEMICONDUCTORDTA218TECHNICAL DATADigital transistors (built-in resistors) Features1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external 3input resistors (see equivalent circuit).22) The bias resistors consist of thinfilm resistors with 1complete isolation to allow positive biasing of the input. They also have the adva
dta219.pdf
SEMICONDUCTORDTA219TECHNICAL DATAPNP Silicon Surface Mount Transistorwith Monolithic Bias Resistor Network Applications Inverter, Interface, DriverOUT Features 1) Built-in bias resistors enable the configuration of anGNDinverter circuit without connecting external inputINresistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors wi
Otros transistores... 2SA1803O , 2SA1803R , 2SA1804 , 2SA1804O , 2SA1804R , 2SA1805 , 2SA1805O , 2SA1805R , D209L , 2SA181 , 2SA1810 , 2SA1810B , 2SA1810C , 2SA1811 , 2SA1815 , 2SA1815-3 , 2SA1815-4 .
Liste
Recientemente añadidas las descripciónes de los transistores:
BJT: SBT42 | 2SA200-Y | 2SA200-O | 2SD882-Q | 2SD882-P | 2SD882-E | 2SC945-L | 2SC945-H | 2SC4226-R23 | 2SC3357-F | 2SC3357-E | 2SC3356-R26 | 2SC3356-R24 | 2SC3356-R23 | 2SB772-Q | 2SB772-P | 2SB772-E | 2SA1015-L | 2SA1015-H | HSS8550 | HSS8050