TransistorsDigital transistors (built-in resistors)DTA123YE / DTA123YUA / DTA123YKA /DTA123YSAFFeatures FExternal dimensions (Units: mm)1) Built-in bias resistors enable theconfiguration of an inverter circuitwithout connecting external inputresistors (see equivalent circuit).2) The bias resistors consist of thin-film resistors with complete isola-tion to allow positive bi

DTA123YE/DTA123YUA/ DTA123YCA/DTA123YKA/DTA123YSA DIGITAL TRANSISTOR(PNP) DIGITAL TRANSISTOR (PNP) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also h

DTA123Y seriesDatasheetPNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors)AEC-Q101 QualifiedlOutlinelParameter Value UMT3EMT3VCC-50VIC(MAX.)-100mA R12.2kDTA123YE DTA123YUADTA123YEFRA DTA123YUAFRAR2 SOT-416(SC-75A) SOT-323(SC-70)10k SMT3 lFeaturesl1) Built-I

DDTA (R1R2 SERIES) KA PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features Epitaxial Planar Die Construction A Complementary NPN Types Available (DDTC) Built-In Biasing Resistors, R1R2 SC-59 Lead Free/RoHS Compliant (Note 1) Dim Min Max "Green" Device, Note 2 and 3 B CA 0.35 0.50 Mechanical Data B 1.50 1.70 C 2.70 3.00 Case: SC

PDTA123Y seriesPNP resistor-equipped transistors; R1 = 2.2 k, R2 = 10 kRev. 04 3 September 2009 Product data sheet1. Product profile1.1 General descriptionPNP Resistor-Equipped Transistors (RET).Table 1. Product overviewType number Package NPNcomplementNXP JEITA JEDECPDTA123YE SOT416 SC-75 - PDTC123YEPDTA123YK SOT346 SC-59A TO-236 PDTC123YKPDTA123YM SOT883 SC-1

CHENMKO ENTERPRISE CO.,LTDCHDTA123YKGPSURFACE MOUNT PNP Digital Silicon TransistorVOLTAGE 50 Volts CURRENT 100 mAmpereAPPLICATION* Switching circuit, Inverter, Interface circuit, Driver circuit.FEATURE* Small surface mounting type. (SOT-23) SOT-23* High current gain. * Suitable for high packing density.* Low colloector-emitter saturation.* High saturation current capabil