TransistorsDigital transistors (built-in resistors)DTA123YE / DTA123YUA / DTA123YKA /DTA123YSAFFeatures FExternal dimensions (Units: mm)1) Built-in bias resistors enable theconfiguration of an inverter circuitwithout connecting external inputresistors (see equivalent circuit).2) The bias resistors consist of thin-film resistors with complete isola-tion to allow positive bi

DTA123YE/DTA123YUA/ DTA123YCA/DTA123YKA/DTA123YSA DIGITAL TRANSISTOR(PNP) DIGITAL TRANSISTOR (PNP) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also h

SMD Type TransistorsDigital TransistorsDTA123YUA (KDTA123YUA) Features Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input.They also have the advantage of almost complet

DTA123Y seriesDatasheetPNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors)AEC-Q101 QualifiedlOutlinelParameter Value UMT3EMT3VCC-50VIC(MAX.)-100mA R12.2kDTA123YE DTA123YUADTA123YEFRA DTA123YUAFRAR2 SOT-416(SC-75A) SOT-323(SC-70)10k SMT3 lFeaturesl1) Built-I

DDTA (R1R2 SERIES) UA PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR Features Epitaxial Planar Die Construction SOT-323 A Complementary NPN Types Available (DDTC) Dim Min Max Built-In Biasing Resistors, R1R2 A 0.25 0.40 Lead Free/RoHS Compliant (Note 1) B 1.15 1.35 "Green" Device (Note 2 & 3) B CC 2.00 2.20 Mechanical Data D 0.65 No

CHENMKO ENTERPRISE CO.,LTDCHDTA123YUGPSURFACE MOUNT PNP Digital Silicon TransistorVOLTAGE 50 Volts CURRENT 100 mAmpereAPPLICATION* Switching circuit, Inverter, Interface circuit, Driver circuit.FEATURE* Small surface mounting type. (SC-70/SOT-323) SC-70/SOT-323* High current gain. * Suitable for high packing density.* Low colloector-emitter saturation.* High saturation c