DTC504 Datasheet, Equivalent, Cross Reference Search
Type Designator: DTC504
SMD Transistor Code: 8C
Material of Transistor: Si
Polarity: Pre-Biased-NPN
Built in Bias Resistor R1 = 47 kOhm
Built in Bias Resistor R2 = 47 kOhm
Typical Resistor Ratio R1/R2 = 1
Maximum Collector Power Dissipation (Pc): 0.15
W
Maximum Collector-Emitter Voltage |Vce|: 50
V
Maximum Collector Current |Ic max|: 0.1
A
Max. Operating Junction Temperature (Tj): 150
°C
Transition Frequency (ft): 250
MHz
Forward Current Transfer Ratio (hFE), MIN: 80
Noise Figure, dB: -
Package: SC89
DTC504 Transistor Equivalent Substitute - Cross-Reference Search
DTC504 Datasheet (PDF)
dtc504.pdf
SEMICONDUCTORDTC504TECHNICAL DATA EPITAXIAL PLANAR NPN TRANSISTORDigital transistors (built-in resistors) Features1) Built-in bias resistors enable the configuration of an inverter circuit withoutconnecting external input resistors (see equivalent circuit).32) The bias resistors consist of thinfilm resistors with complete isolation to allowpositive biasing of the input. The
dtc501.pdf
SEMICONDUCTORDTC501TECHNICAL DATABias Resistor TransistorsNPN Silicon Surface Mount Transistorswith Monolithic Bias Resistor Network3This new series of digital transistors is designed to replace a singledevice and its external resistor bias network. The BRT (Bias Resistor2Transistor) contains a single transistor with a monolithic bias network1consisting of two resistors;
dtc505.pdf
SEMICONDUCTORDTC505TECHNICAL DATADigital transistors (built-in resistors) Features1) Built-in bias resistors enable the configuration of aninverter circuit without connecting external input3resistors (see the equivalent circuit).2) The bias resistors consist of thin-film resistors with 2complete isolation to allow negative biasing of the1input. They also have the adva
dtc506.pdf
SEMICONDUCTORDTC506TECHNICAL DATADigital transistors (built-in resistors)NPN Silicon Surface Mount Transistorwith Monolithic Bias Resistor Network Applications 3Inverter, Interface, Driver Features 21) Built-in bias resistors enable the configuration of an1inverter circuit without connecting external inputSC-89(SOT-5203)resistors (see equivalent circuit). 2
dtc502.pdf
SEMICONDUCTORDTC502TECHNICAL DATADigital transistors (built-in resistors) Features1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input 3resistors (see equivalent circuit).2) The bias resistors consist of thin-film resistors with 2complete isolation to allow negative biasing of the input. 1They also have the advan
Datasheet: 2SA1803O , 2SA1803R , 2SA1804 , 2SA1804O , 2SA1804R , 2SA1805 , 2SA1805O , 2SA1805R , TIP42 , 2SA181 , 2SA1810 , 2SA1810B , 2SA1810C , 2SA1811 , 2SA1815 , 2SA1815-3 , 2SA1815-4 .
