DTA123YC3 Datasheet, Equivalent, Cross Reference Search
Type Designator: DTA123YC3
SMD Transistor Code: 52
Material of Transistor: Si
Polarity: Pre-Biased-PNP
Built in Bias Resistor R1 = 2.2 kOhm
Built in Bias Resistor R2 = 10 kOhm
Typical Resistor Ratio R1/R2 = 0.22
Maximum Collector Power Dissipation (Pc): 0.15
W
Maximum Collector-Emitter Voltage |Vce|: 50
V
Maximum Emitter-Base Voltage |Veb|: 5
V
Maximum Collector Current |Ic max|: 0.1
A
Max. Operating Junction Temperature (Tj): 150
°C
Transition Frequency (ft): 250
MHz
Forward Current Transfer Ratio (hFE), MIN: 33
Noise Figure, dB: -
Package: SOT-523
DTA123YC3 Transistor Equivalent Substitute - Cross-Reference Search
DTA123YC3 Datasheet (PDF)
dta123yc3.pdf
Spec. No. : C262C3 Issued Date : 2012.08.08 CYStech Electronics Corp.Revised Date : Page No. : 1/6 PNP Digital Transistors (Built-in Resistors) DTA123YC3 Features Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). The bias resistors consist of thin-film resistors with complete
ddta123yca.pdf
DDTA (R1R2 SERIES) CA PNP PRE-BIASED SMALL SIGNAL SOT-23 SURFACE MOUNT TRANSISTOR Please click here to visit our online spice models database.Features Epitaxial Planar Die Construction SOT-23 A Complementary NPN Types Available (DDTC) Dim Min Max Built-In Biasing Resistors, R1R2 A 0.37 0.51 Lead, Halogen and Antimony Free, RoHS Compliant B 1.20 1.40
dta123yca dta123ye dta123yka dta123ysa dta123yua.pdf
DTA123YE/DTA123YUA/ DTA123YCA/DTA123YKA/DTA123YSA DIGITAL TRANSISTOR(PNP) DIGITAL TRANSISTOR (PNP) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also h
dta123yca.pdf
SMD Type TransistorsDigital TransistorsDTA123YCA (KDTA123YCA)SOT-23Unit: mm+0.12.9 -0.1+0.10.4 -0.1 Features3 Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors(see equivalent circuit) The bias resistors consist of thin-film resistors with complete1 2+0.1+0.05 isolation to allow positiv
Datasheet: 2SA1803O , 2SA1803R , 2SA1804 , 2SA1804O , 2SA1804R , 2SA1805 , 2SA1805O , 2SA1805R , D209L , 2SA181 , 2SA1810 , 2SA1810B , 2SA1810C , 2SA1811 , 2SA1815 , 2SA1815-3 , 2SA1815-4 .
