DTA014EM Datasheet. Equivalente. Reemplazo. Hoja de especificaciones. Principales características

Número de Parte: DTA014EM  📄📄 

Material: Si

Polaridad de transistor: Pre-Biased-PNP

Resistencia de Entrada Base R1 = 10 kOhm

Resistencia Base-Emisor R2 = 10 kOhm

Ratio típica de resistencia R1/R2 = 1

ESPECIFICACIONES MÁXIMAS

Disipación total del dispositivo (Pc): 0.15 W

Tensión colector-emisor (Vce): 50 V

Tensión emisor-base (Veb): 40 V

Corriente del colector DC máxima (Ic): 0.05 A

Temperatura operativa máxima (Tj): 150 °C

CARACTERÍSTICAS ELÉCTRICAS

Transición de frecuencia (fT): 250 MHz

Ganancia de corriente contínua (hFE): 35

Encapsulados: SC-105AA VMT3 SOT723

  📄📄 Copiar 

 Búsqueda de reemplazo de DTA014EM

- Selecciónⓘ de transistores por parámetros

 

DTA014EM datasheet

 7.1. Size:349K  rohm
 dta014e.pdf pdf_icon

DTA014EM

-100mA/-50V Digital transistors(with built-in resistors) DTA014EM / DTA014EEB / DTA014EUB Features Dimensions (Unit mm) 1) Built-in bias resistors enable the configuration of VMT3 an inverter circuit without connecting external input resistors. (See equivalent circuit) 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the i

 8.1. Size:986K  rohm
 dta014y.pdf pdf_icon

DTA014EM

Data Sheet -100mA/-50V Digital transistors(with built-in resistors) DTA014YM / DTA014YEB / DTA014YUB Features Dimensions (Unit mm) 1) Built-in bias resistors enable the configuration of VMT3 an inverter circuit without connecting external input resistors. (See Equivalent circuit) 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive bias

 8.2. Size:1053K  rohm
 dta014teb dta014tm dta014tub.pdf pdf_icon

DTA014EM

DTA014T series Datasheet PNP -100mA -50V Digital Transistors (Bias Resistor Built-in Transistors) lOutline l Parameter Value VMT3 EMT3F VCEO -50V IC -100mA R1 10k DTA014TM DTA014TEB (SC-105AA) (SC-89) UMT3F lFeatures l 1) Built-In Biasing Resistor 2) Built-in bias resistors enable

 8.3. Size:295K  rohm
 dta014t.pdf pdf_icon

DTA014EM

-100mA/-50V Digital transistors(with built-in resistors) DTA014TM / DTA014TEB / DTA014TUB Features Dimensions (Unit mm) 1) Built-in input resistor enables the direct control of base VMT3 terminal by input voltage without external resistor. (See equivalent circuit) 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input.

MOSTRAR MÁS

Otros transistores... SSTA13, SSTA28, SSTA56, UMT2222A, UMT2907A, UMT3904, UMT3906, DTA014EEB, TIP32C, DTA014EUB, DTA014YEB, DTA014YM, DTA014YUB, DTA015EEB, DTA015EM, DTA015EUB, DTA023EEB