DTA218 Datasheet, Equivalent, Cross Reference Search
Type Designator: DTA218
SMD Transistor Code: F52
Material of Transistor: Si
Polarity: Pre-Biased-PNP
Built in Bias Resistor R1 = 2.2 kOhm
Built in Bias Resistor R2 = 10 kOhm
Typical Resistor Ratio R1/R2 = 0.22
Maximum Collector Power Dissipation (Pc): 0.2
W
Maximum Collector-Base Voltage |Vcb|: 50
V
Maximum Collector-Emitter Voltage |Vce|: 50
V
Maximum Collector Current |Ic max|: 0.5
A
Max. Operating Junction Temperature (Tj): 150
°C
Transition Frequency (ft): 200
MHz
Forward Current Transfer Ratio (hFE), MIN: 56
Noise Figure, dB: -
Package: SOT23
DTA218 Transistor Equivalent Substitute - Cross-Reference Search
DTA218 Datasheet (PDF)
dta218.pdf
SEMICONDUCTORDTA218TECHNICAL DATADigital transistors (built-in resistors) Features1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external 3input resistors (see equivalent circuit).22) The bias resistors consist of thinfilm resistors with 1complete isolation to allow positive biasing of the input. They also have the adva
dta216.pdf
SEMICONDUCTORDTA216TECHNICAL DATADigital transistors (built-in resistors) Features1) The built-in bias resistor allows the configuration OUTof an inverter circuit without connecting any external in-put resistors (see Equivalent cir-cuit).GND2) Each bias resistor is a thin-film re-sistor. INSince they are completely in-sulated, the input can be SOT-23positively biase
dta201 dta214 dta217 dta223.pdf
SEMICONDUCTOR DTA201 ~ DTA214 /TECHNICAL DATADTA217 / DTA223Bias Resistor TransistorsPNP Silicon Surface Mount Transistorswith Monolithic Bias Resistor NetworkThis new series of digital transistors is designed to replace a single3device and its external resistor bias network. The BRT (Bias ResistorTransistor) contains a single transistor with a monolithic bias network2cons
dta219.pdf
SEMICONDUCTORDTA219TECHNICAL DATAPNP Silicon Surface Mount Transistorwith Monolithic Bias Resistor Network Applications Inverter, Interface, DriverOUT Features 1) Built-in bias resistors enable the configuration of anGNDinverter circuit without connecting external inputINresistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors wi
Datasheet: 2SA1771 , 2SA178 , 2SA1790 , 2SA1791 , 2SA1792 , 2SA1793 , 2SA1794 , 2SA1795 , 2N3906 , 2SA1799 , 2SA17H , 2SA18 , 2SA180 , 2SA1800 , 2SA1800O , 2SA1800R , 2SA1800Y .
History: BUV71
