NJT4030P . Datasheet. Equivalente. Reemplazo. Hoja de especificaciones. Principales características

   Número de Parte: NJT4030P
   Código: 4030P
   Material: Si
   Polaridad de transistor: PNP

ESPECIFICACIONES MÁXIMAS

   Disipación total del dispositivo (Pc): 2 W
   Tensión colector-emisor (Vce): 40 V
   Corriente del colector DC máxima (Ic): 3 A

CARACTERÍSTICAS ELÉCTRICAS

   Transición de frecuencia (ft): 100 MHz
   Ganancia de corriente contínua (hfe): 200
   Paquete / Cubierta: SOT223 TO261

Búsqueda de reemplazo de transistor bipolar NJT4030P

NJT4030P Datasheet (PDF)

..1. Size:190K onsemi
njt4030p njv4030p.pdf

Bipolar Power TransistorsPNP SiliconNJT4030P, NJV4030PFeatures Epoxy Meets UL 94, V-0 @ 0.125 in NJV Prefix for Automotive and Other Applications Requiringwww.onsemi.comUnique Site and Control Change Requirements; AEC-Q101Qualified and PPAP CapablePNP TRANSISTOR These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS3.0 AMPERESCompliant40 VOLTS, 2.0 WATT

0.1. Size:132K onsemi
njt4030p-t.pdf

NJT4030P,NJV4030PT1G,NJV4030PT3GBipolar Power TransistorsPNP Siliconhttp://onsemi.comFeaturesPNP TRANSISTOR Collector -Emitter Sustaining Voltage - 3.0 AMPERESVCEO(sus) = 40 Vdc (Min) @ IC = 10 mAdc40 VOLTS, 2.0 WATTS High DC Current Gain - hFE = 200 (Min) @ IC = 1.0 Adc= 100 (Min) @ IC = 3.0 Adc Low Collector -Emitter Saturation Voltage - VCE(sat) = 0.2

0.2. Size:274K onsemi
njt4030p-d.pdf

NJT4030PBipolar Power TransistorsPNP SiliconFeatures Collector --Emitter Sustaining Voltage --http://onsemi.comVCEO(sus) =40Vdc (Min) @IC =10mAdc High DC Current Gain --PNP TRANSISTORhFE = 200 (Min) @ IC =1.0 Adc= 100 (Min) @ IC =3.0 Adc3.0 AMPERES Low Collector --Emitter Saturation Voltage --40 VOLTS, 2.0 WATTSVCE(sat) = 0.200 Vdc (Max) @ IC =1.0 Adc= 0.5

8.1. Size:180K onsemi
njt4031n njv4031nt1g njv4031nt3g.pdf

NJT4031N,NJV4031NT1G,NJV4031NT3GBipolar Power TransistorsNPN Siliconhttp://onsemi.comFeatures Epoxy Meets UL 94, V-0 @ 0.125 inNPN TRANSISTOR NJV Prefix for Automotive and Other Applications Requiring3.0 AMPERESUnique Site and Control Change Requirements; AEC-Q10140 VOLTS, 2.0 WATTSQualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free a

8.2. Size:112K onsemi
njt4031n.pdf