2N5240 Datasheet and Replacement

NPN Power Silicon Transistor2N5240Features High Voltage: Vceo(sus) = 300 V (min) Wide Area of Safe Operation Designed for use in series regulators, power amplifiers, inverters, deflection circuits, switchingregulators, and high-voltage bridge amplifiers. TO-3 (TO-204AA) PackageMaximum Ratings (TA = 25 C) Ratings Symbol Value UnitsCollector - Base Voltage VCBO

INCHANGE Semiconductor isc Product Specification isc Silicon NPN Power Transistor 2N5240 DESCRIPTION High Voltage- : VCEO(SUS)= 300V(Min) Wide Area of Safe Operation APPLICATIONS Designed for use in series regulators, power amplifiers, inverters, deflection circuits, switching regulators, and high-voltage bridge amplifiers. ABSOLUTE MAXIMUM RATINGS(Ta=25) SYMBOL

2N5246N-Channel RF Amplifier This device is designed for HF/VHF mixer/amplifier and applications where process 50is not adequate. Sufficient gain and low noise for sensitive receivers. Sourced from process 90.TO-9211. Gate 2. Source 3. DrainAbsolute Maximum Ratings* Ta=25C unless otherwise noted Symbol Parameter Ratings UnitsVDG Drain-Gate Voltage 30 VVGS Gate-So

2N5245N-Channel RF Amplifier This device is designed for HF/VHF mixer/amplifier and applications where process 50is not adequate. Sufficient gain and low noise for sensitive receivers. Sourced from process 90.TO-9211. Gate 2. Source 3. DrainAbsolute Maximum Ratings* Ta=25C unless otherwise noted Symbol Parameter Ratings UnitsVDG Drain-Gate Voltage 30 VVGS Gate-So

Product Specification www.jmnic.com Silicon NPN Power Transistors 2N5241 DESCRIPTION With TO-3 package High breakdown voltage APPLICATIONS Switching regulator Inverters Solenoid and relay drivers Motor controls PINNING (See Fig.2) PIN DESCRIPTION1 Base 2 Emitter3 CollectorFig.1 simplified outline (TO-3) and symbol MAXIMUN RATINGS(Ta=25) SYMBOL PA

Inchange Semiconductor Product Specification Silicon NPN Power Transistors 2N5241 DESCRIPTION With TO-3 package High breakdown voltage APPLICATIONS Switching regulator Inverters Solenoid and relay drivers Motor controls PINNING (See Fig.2) PIN DESCRIPTION1 Base 2 EmitterFig.1 simplified outline (TO-3) and symbol 3 CollectorMAXIMUN RATINGS(Ta=25)